Building exterior tape

Architectural exterior wall tape is a single-sided tape that must be used in real stone paint and imitation brick projects. (JZY single-sided foam) When building exterior walls, how to make the exterior walls into ceramic tiles has become a difficult problem. At present, according to the construction characteristics of real stone paint, Naikos has developed a real stone paint tape for imitating facing bricks. This architectural exterior tape is the same thickness as real stone paint wall sand paint, and when divided into bricks, it looks neat and beautiful.
What is Construction Tape?
Construction tape is a tape that uses foam as a cover, uses black foam as a base material, and then uses single-sided rubber coating or hot-melt tape to stick them tightly. At present, this construction tape has been widely used in the masking of imitation brick real stone paint or paint spraying on building exterior walls.
In terms of building real stone paint projects, it is the most reasonable and convenient to use building exterior wall tape. It has developed rapidly in the construction industry.
The characteristics and functions of building exterior wall tape

1. Features of building exterior wall tape:
2. To be able to stick to the wall, it should not fall off from the time it is pasted on the wall until it is covered or sprayed with real stone paint. It usually stays on the wall for 1 to 5 hours.
3. There must be thickness. The thickness of the adhesive tape is the thickness of the imitation brick. Only the imitation brick can have a three-dimensional effect.
4. It must be torn off. After finishing the real stone paint spraying work, the tape must be removed. During the tearing process, the primer on the wall must not be damaged, and no residual glue shall be left.
5. The function of building exterior wall tape:
   Before the exterior wall is about to be painted with real stone paint, use building exterior wall tape to divide the exterior wall into a pattern of bricks, then apply real stone paint, and then tear off the construction tape. In this way, the effect of the entire exterior wall will be presented in a tile style.
   Specifications for Exterior Construction Tape
   This single-sided foam tape is divided into low-viscosity, conventional and high-viscosity models according to the requirements and characteristics of real stone paint imitation brick wall construction, combined with the external wall environment, season, and roughness of the wall surface.
   Width (mm): 4,5,6,,8,10,12,15,20,30. Among them, 8, 10, and 15 are the conventional widths of the market, and the rest are the widths of special requirements.
   Thickness (mm): 0.8, 1.0, 1.2, 1.5, 2.0. Among them, 0.8 and 1.0 are the normal thickness of the market, and the rest are the thickness of special requirements.
   Length (m): The standard roll is 10M in length.
   According to the roughness of the wall surface, it is divided into high-viscosity, regular, low-viscosity and other specifications.
   High viscosity is generally used on relatively rough walls to achieve the effect that it is not easy to fall off;
   Routinely, it is mainly used on a slightly smooth wall surface so that it can not be removed and no residual glue is left;
   Low-viscosity is mainly used on very smooth walls to prevent the primer from being taken away when it is torn off.
   According to the different viscosity, it can be divided into soft foam and hard foam.
   Soft foam is mainly used for adhesive tapes with a viscosity below normal, and hard foam is used for adhesive tapes with a viscosity above normal. Both of them are mainly used to achieve the effect of fast and continuous adhesive tape when tearing off. .
   Construction Notes
6. During construction, the temperature of the wall is higher than 50°C, and the wind force is higher than 3-4. It is not suitable for construction.
7. During construction, stick the adhesive tape tightly, and do not stick it with dots.
8. Avoid rainy weather to prevent the adhesive tape from entering water, losing part or most of its effect and falling off.
9. The time interval for staying on the wall should not be too long.
   Market Analysis of Building Exterior Wall Tape
   High-grade real stone paint must be equipped with strict construction techniques and materials, but if the construction personnel are inexperienced and low-educated, it will also cause various problems, and this real stone paint exterior wall imitation brick tape happens to be used by everyone, so it solves the problem. Meet the various requirements of construction personnel.
   In order to meet the needs of the increasingly individualized development of the high-grade architectural decoration industry, only more perfect and more supporting construction techniques can fully demonstrate the unique appearance and superior performance of real stone paint.
   As more and more buildings pursue simplicity and beauty. There are many advantages of low-cost construction, simple operation and fast construction speed. I believe that all kinds of buildings in the future will follow this pattern.