Cómo usar la cinta de advertencia

Warning Tape (Identification Tape): Adhesive tape based on PVC PVC film, coated with rubber
Manufactured from glue-type pressure-sensitive adhesive. The warning tape is waterproof, moisture-proof, weather-resistant, corrosion-resistant,
Anti-static and other advantages, suitable for anti-corrosion protection of underground pipelines such as air pipes, water pipes, and oil pipelines
protect. Twill printing tape can be used for warning in areas such as floors, columns, buildings, traffic, etc.
sign. Anti-static warning tape can be used to warn the floor area,
Anti-static warning floor tape
Box sealing warning, product packaging warning, etc., color: yellow, black, medium,
English warning slogan, the viscosity is oily super high viscosity rubber glue, anti-static warning tape table
Area resistance 107-109 107-109 107-109 ohms, warning tape is used to mark warning areas, divide danger warnings, mark classifications, etc. Warning tapes are used to mark warning areas, divide danger warnings, mark classifications, etc. Warning tapes are used to mark warning areas , Separation of danger warnings, labeling and classification, etc. There are various styles of black, yellow or red and white lines to choose from; the surface is wear-resistant and can
Withstand high-flow pedals; good viscosity, certain anti-corrosion, acid and alkali resistance, and anti-wear.
Uses: Paste on the ground, walls and machines for prohibition, warning, reminder and emphasis
effect
characteristic:

1. . Strong viscosity, can be used on ordinary cement floor
2. Compared with painting on the ground, it is easier to operate
3. Not only can be used on ordinary ground, but also can be used on wooden floor, ceramic tile, marble, wall
   and machines (and floor paint can only be used on ordinary floors)
4. The paint cannot draw two-color lines

warning tape
Specification parameters: width 4.8 4.8 4.8 cm, length 252525 meters, a total of 1.2 1.2 1.2 square meters; thickness 0.15 0.15 0.15 mm
Remarks: When marking tape is used for area division, it is called marking tape or area glue; when it is used as warning tape; when it is used as warning, it is called warning tape. But actually both are the same thing.
When it is used for regional division, there is no relevant standard or customary statement at present.
What kind of area is specified and what color needs to be used to divide it, green, yellow, blue, white,
are commonly used. When used as a warning, according to GBGBGB 2893 2893 2893-2001 2001 2001 “<Safety
“Color” and “Warning Signs of Occupational Hazards in the Workplace” issued by the Ministry of Health in 2003, single-color red, yellow, green and double-color red-white, green-white and yellow-black can be used as warning lines. Here, we suggest to make a distinction between scribe tape and warning tape.
White, Yellow and Green We recommend distinguishing between scribe tape and warning tape.
White, yellow and green are used for marking; red, red and white, green and white and yellow and black are used for warning.
When used as a warning, red means prohibition and prevention; red and white stripes mean that people are prohibited from entering dangerous environments; yellow and black stripes mean to remind people to pay special attention; green and white stripes mean more eye-catching Tip people.

Storage, transportation and maintenance of adhesive tape

1. The adhesive tape should be stored in the warehouse to avoid sun exposure and rain; it is forbidden to be organic with acid-base oil, and the tape should be stored in the warehouse to avoid sunlight and rain; it is prohibited to be organic with acid-base oil, and the tape should be stored in the warehouse to avoid sunlight. Sunshine, rain; Prohibited with acid-base oil organic
   Solvent contact, keep clean and dry, distance from the discovery device solvent contact, keep clean and dry, distance from the discovery device solvent contact, keep clean and dry, 1m1m1m away from the discovery device, room temperature is outside, room temperature is outside, room temperature is -15 -15 -15°C ~40 ~40 ~40℃.
2. The tape should be placed in rolls, not folded, and should be turned quarterly when stored for a long time. When the time is too long, it should be turned once a quarter. Anti-static warning floor tape
3. It is best to use a crane when loading and unloading the conveyor belt, and use a sling with a crossbeam to hang it stably. And the rigging with beams should be hoisted smoothly to avoid damage to the belt edge, and do not load and unload violently, causing loose coils and throwing sleeves.
4. The type and specification of the tape should be reasonably selected according to the needs and specific conditions of use.
5. It is not allowed to use tapes of different varieties, specifications, strengths, and layers of cloth; tape
   Connected (matched) for use together.
6. It is best to use hot vulcanized glue for the conveyor belt joints to improve reliability. It is best to use heat vulcanized glue for the maintenance and conveyor belt joints to improve reliability. It is best to use heat vulcanized glue for the maintenance and conveyor belt joints to improve reliability, maintain
   Higher effective strength.
7. The diameter of the conveying roller of the conveyor and the minimum diameter of the pulley of the conveyor belt should be consistent. The diameter of the conveying roller of the conveyor should be consistent with the minimum diameter of the pulley of the conveyor belt. should meet
   related terms.
8. Do not make the tape snake or creep, keep the drag roller, vertical roller flexible, tension, do not make the tape snake or creep, keep the drag roller, vertical roller flexible, tension, do not make the tape snake or creep OK, keep drag rollers, vertical rollers flexible, tension
   Be in moderation.
9. When the conveyor is equipped with a baffle and a cleaning device, the wear of the tape should be avoided.
10. Cleanliness is the basic condition for the good operation of the tape, foreign substances will affect the tape
    sub-center, tension differences, and even breakage.
11. When the tape is found to have early damage during use, the cause should be found in time.
    Repair to avoid adverse consequences.