To test the peel force of the tape, you need to use a peel strength tester, a manual rolling roller and a steel plate 3 instruments and accessories. The following is a demonstration of the specific test method for the tape peel force test.
Peel Tester—Test Method for Tape Peel Force
- Cut the tape into a standard test piece with a width of 25.4mm and a length of 300mm. (see picture 1)
- Paste the cut tape on the standard 304# mirror steel plate. (See Figure 2)
- After pasting, use a standard 2KG rolling roller to reciprocate three times. (See Figure 3)
- After pressing, be careful not to have air bubbles in the tape. (See Figure 4)
- After pressing, let it stand still for a few minutes, so that the adhesive tape can achieve the best effect. (See Figure 5)
- Peel off one end. (See Figure 6)
- Fix the finished test piece vertically on the fixture of the tensile testing machine. (See Figure 7)
- Start the test. (See Figure 8)
- Test